Passive probe

ETA5101 Oscilloscope passive voltage probe

100MHz oscilloscope probe - using low resistance gold plated needle, snap-type rotary grounding wire, allowing users to switch between 1X and 10X quickly and manually. The main body of the probe is made of high-strength plastics. Soft plastics are used to ensure the service life of the cable at all bending stresses.

 

- Safety type BNC interface

- 100 MHZ operating frequency

- X1, X10 attenuation switch

- Including "attachment package" is very suitable for engineering use.

- UHF oscilloscope for special purpose, suitable for 20 MHz to 100MHz digital oscilloscope

Product nameOscilloscope passive probe
ModelETA5101
X 10 
Attenuation ratio10:1
BandwidthDC to 100MHz
Rise time3.5nS
Input impedance10MΩ (oscilloscope input impedance1MΩ) 
Input capacitanceAbout 12 pF
Compensation range10 to 50 pF
Input voltage400V CAT I, 300V CAT II (DC+peak AC) 
X 1 
Attenuation ratio1:1
BandwidthDC to 6MHz
Rise time58nS
Input impedance1MΩ  (oscilloscope input impedance)
Input capacitance95 pF (Add oscilloscope capacitance)
Input voltage150V CAT II (DC+peak AC)  
Operating temperature0 ℃ to + 50 ℃
Humidity85% RH or less (at 35 ℃)
Overall length1.2m
Safety regulationsMeets EN61010-031 CAT II

No video