High voltage single-ended probe

ETA5210V Oscilloscope high voltage probe

ETA5210V can measure up to 10KV DC, 7KV AC voltage, 100MΩ input impedance, low load effect, and 120MHz high bandwidth allows you to capture fast, high-voltage signals. The high-voltage probe can be directly connected to an oscilloscope for direct measurement, which is suitable for high-voltage ground reference voltage measurement. In addition, the voltage value can be measured on the digital meter by purchasing an adapter. ETA5210V uses environmentally friendly silicone insulating medium, which does not need to be supplemented. It can increase the insulation performance, measure high voltage while ensuring that internal components will not oxidize, and extend the service life.

Features:
• Maximum measurement voltage: 10KV DC+ACpeak
• Bandwidth up to 120MHz
• Input impedance 100MΩ
• Fixed attenuation ratio 100:1, Read Out
• With impedance matching device, it can be connected to a multimeter for use


ModelETA5210V
Attenuation ratio100:1
Read functionO
Input resistance100MΩ
Input capacitance2.0PF
Maximum input:DC+AC peak10KV CAT II
Maximum input:AC RMS7KV CAT II
Pulse voltage<7KVp-p
Maximum load current100uA
BandwidthDC~120MHz
Rise Time3.0nS
Noise ratio>60dB at 1KHz ; >50dB at 1MHz
DC signal error value≤3% of the entire range, ≤3% (0-35KV)
DC signal error value≤3% 在1KHz
Temperature Coefficient
≤200 PPM/℃
Matching capacitance adjustment range10PF~35PF
Safety inspectionComply with EN61010-031 CAT II specification
Length of test line2M±0.2M
Working temperature and humidity0~40℃,80% or less
Storage temperature and humidity-10~45℃,80% or less
Color: grip/bodyBlack/light gray
Size80mmx80mmX320mm
Weight460g

* All parameters are from the ETA manufacturer, if there is any change, please refer to the actual product and the manufacturer’s instructions

No video

No Related Products