High voltage single-ended probe

ETA5218V Oscilloscope high voltage probe

ETA5218V can measure up to 18KV DC, 12KV AC voltage, 200MΩ input impedance high-voltage probe connected to an oscilloscope can be directly measured, suitable for high-voltage ground reference voltage measurement. ETA5218V uses environmentally friendly silicone insulating medium to be supplemented and recharged to increase the insulation performance. When measuring high voltage, ensure that the internal components will not oxidize and prolong the service life.

Features:
• Maximum measurement voltage: 18KV DC+ACpeak
• Bandwidth up to 100MHz
• Input impedance 200MΩ
• Fixed attenuation ratio 1000:1, Read Out
• With impedance matching device, it can be connected to a multimeter for use


ModelETA5218V
Attenuation ratio1000:1
Read function-
Input resistance200MΩ
Input capacitance1.5PF
Maximum input:DC+AC peak18KV CAT II
Maximum input:AC RMS12KV CAT II
Pulse voltage＜12KVp-p
Maximum load current90uA
BandwidthDC~100MHz
Rise Time5.3nS
Noise ratio>60dB at 1KHz ; >50dB at 1MHz
DC signal error value≤3% of the entire range, ≤3% (0-35KV)
AC signal error value≤3% 在1KHz
Temperature Coefficient≤200 PPM/℃
Matching capacitance adjustment range10PF~35PF
Safety inspectionComply with EN61010-031 CAT II specification
Length of test line2M±0.2M
Working temperature and humidity0~40℃,80% or less
Storage temperature and humidity-10~45℃,80% or less
Color: grip/bodyBlack/yellow
Size80mmx80mmX320mm
Weight460g

* All parameters are from the ETA manufacturer, if there is any change, please refer to the actual product and the manufacturer’s instructions

No video

No Related Products