High voltage probe

ETA5208V Oscilloscope high voltage probe

ETA5208V can measure up to 8KV DC, 6KV AC voltage, 100MΩ input impedance, low load effect, and 40MHz bandwidth enables you to capture fast, high-voltage signals. The high-voltage probe can be directly connected to an oscilloscope for direct measurement, which is suitable for high-voltage ground reference voltage measurement. In addition, the voltage value can be measured on the digital meter by purchasing an adapter. ETA5208V uses a non-hazardous silicone insulating medium, which can increase the insulation performance and ensure that the internal components will not be oxidized when measuring high voltages and prolong the service life.

Features:
• Maximum measurement voltage: 8KV DC+ACpeak
• Bandwidth up to 40MHz
• Input impedance 100MΩ
• Fixed attenuation ratio 1:1000
• With impedance matching device, it can be connected to a multimeter for use


ModelETA5208V
Test voltageDC:0～8KV
AC:pulse≤16KV peak to peak
AC:sine wave≤6KV rms
Signal to Noise Ratio (S/N)DC≧60dB(1KHz)
≧50dB(1MHz)
Test bandwidthDC～40MHz(-3dB)
Attenuation ratio1:1000
Rise Time≤9ns
Input capacitance100M Ω ±0.5%
Matching capacitance (adjustable)3.0PF±0.5%PF
Line length2.0meter(±0.2m)
Temperature Coefficient≦200PPM/℃
DC test degree±2%(DC to 5KV)， ±3%(5KV to 8KV)
AC test±3%(AC to 1KHz/1KV)-3dB 40MHz
Security applicationCE,GS,UL,CUL
Operating temperature-20℃~+70℃
Size215mm (length), 47Φ (cylindrical)
Weight180g

* All parameters are from the ETA manufacturer, if there is any change, please refer to the actual product and the manufacturer’s instructions

No video

No Related Products