Current measuring probe

ETA532X Series oscilloscopes with high frequency current loops

 ETA532X series current sensor is used for AC current measurement, the measured current is up to 50A RMS, the maximum pulse current is 10000A, the bandwidth is 50MHZ, the rise time is 200ns, and the jaw diameter is about 14mm; Standard BNC output interface, can be connected to any manufacturer oscilloscope; Add standard accessory BNC to banana socket to realize the connection to the digital multimeter. Widely used in high-end medical multi-band current sensing; Square wave, triangle wave passive mutual inductance, laboratory broadband current research, lightning surge waveform observation, switch short-circuit current detection.


ModelETA5325ETA5322ETA5321ETA5320
Bandwidth Hz10Hz~50M10Hz~20M10Hz~10M10Hz~5M
Rise time≤10ns≤20ns≤50ns≤100ns
Enter the typeAC
precision士1%
Current conversion ratio1V/A100mV/A50mV/A10mV/A
Minimum RMS5mA10mA20mA50mA
Maximum RMS2A20A50A100A

Maximum pulse peak electricity

200A2000A4000A10000A
Jaw diameter∅14mm

Oscilloscope input impedance

1MΩ
Interface typeBNC
Cable length100cm
Accessories are standard4mm adapter plug
Size83.5X60X20mm
Weight380g
Working environment-20~80°C, less than 80%RH

ETA532X系列电流环.jpg

No video