ETA5314 series current sensor is used for AC current measurement, the measured current is up to 400A RMS, the maximum pulse current is 100KA, the bandwidth is 2MHZ, the rise time is 200ns, and the jaw diameter is about 50mm; Standard BNC output interface, can be connected to any manufacturer oscilloscope; Add standard accessory BNC to banana socket to realize the connection to the digital multimeter. Widely used in high-end medical multi-band current sensing; Square wave, triangle wave passive mutual inductance, laboratory broadband current research, lightning surge waveform observation, switch short-circuit current detection.
| Model | ETA5314 | ETA5314A |
| Bandwidth Hz | 10Hz~2MHz | |
| Rise time | ≤200ns | |
| Enter the type | AC | |
| precision | 士1% | |
| Current conversion ratio | 1mV/A | |
| Minimum RMS | 400A | 50mA |
| Maximum RMS | 20KA | 200A |
Maximum pulse peak electricity | 200A | 100KA |
| Jaw diameter | ∅50mm | |
Oscilloscope input impedance | 1MΩ | |
| Interface type | BNC | |
| Cable length | 100cm | |
| Accessories are standard | 4mm adapter plug | |
| Size | 134.6X 108X32mm | 127.8X100X26mm |
| Weight | 720g | 520g |
| Working environment | -20~80°C, less than 80%RH | |
No video
