Current probe

ETA56150U AC / DC probe

The ETA56XXX series is a universal oscilloscope current probe, compatible with over 95% of oscilloscopes on the market, with a frequency response of up to 20MHz and a measurement range of 50mA to 750A (peak), featuring a BNC output terminal. When connected to an oscilloscope, it can accurately measure AC or DC current waveforms, and the range can be selected on the handle panel.
Product Features:
- AC and DC compatible
- Current measurement range: 50mA to 500Arms
- Can measure thin cables (Ø19mm)
- Accurate measurement, analysis, and display of distorted current waveforms and harmonics.


ModelETA56150U
Range

30Arms   0.1V/A 

150A rms 0.01V/A

Current range

30A ±1% ±20mA

150A ±1% ±200mA

Resolution

30A       20mA

150A   200mA

Peak current300A
Typical frequency response curvePlease refer to the image on the right.
Maximum working voltage
600V  CATII   300V  CATIII
Frequency rangeDC-15MHz 
Typical DC signal linearPlease refer to the image on the right.
Typical phase shiftPlease refer to the image on the right.
Jaw sizeMaximum 19mm
Overall dimensions

Control box:109mmx24.2mmx57.8mm     Current clamp:170mmx30mmx65mm

Cable lengthCable from control box to BNC connector      Cable length: 0.9m from the control box to the current clamp cable length: 1.4m
Operating temperature0 ℃ to + 50 ℃
Humidity0°C to +40°C,Humidity85%RH;+40°C~+50°C,Humidity45%RH
Safety regulations

Meets EN61010-1/A2:1995;Meets EN61010-2-032:1995

image

image

image

No video

No Related Products