Current probe

ETA56300A AC/DC probe

ETA56XXX series is the 1 universal oscilloscope current probe, compatible with more than 95% of oscilloscopes on the market, with a frequency response measurement range of up to 20MHz of 50mA to 750A (peak value) and BNC output terminals. Connect an oscilloscope to accurately measure AC or DC current waveforms, and the range can be selected on the handle panel.
Product features:
-AC/DC dual purpose
-Current measurement range: 50mA to 500Arms
-Can measure the fine cable (Ø19mm)
-Accurately measure, analyze and display distorted current waveforms and harmonics

ModelETA56300A
Range

50Arms   0.1V/A 

300A rms 0.01V/A

Current range

50A ±1% ±10mA

300A ±1% ±100mA

Resolution

50A       10mA

300A   100mA

Peak current500A



typical frequency response curvePlease refer to the picture on the right
Maximum operating voltage
600V  CATII   300V  CATIII
Frequency rangeDC-8MHz 
Typical DC signal linearityPlease refer to the picture on the right
Typical Phase TransferPlease refer to the picture on the right
Jaw sizeMaximum 19mm
Overall dimensions

Control box:109mmx24.2mmx57.8mm     Current clamp:170mmx30mmx65mm

Cable lengthControl box to BNC connector line      Cable length: 0.9m cable length from control box to current clamp: 1.4m
Operating temperature0 ℃ to + 50 ℃
Humidity0°C to +40°C, 85% RH;+40℃~+50℃,Humidity 45% RH
Safety regulations

Meets EN61010-1/A2:1995;Meets EN61010-2-032:1995


image

image

image

No video

No Related Products