HP6351R oscilloscope high frequency probe - 350MHz probe with safety BNC connector, with reading recognition function, can be replaced with low resistance gold-plated stylus, 10X fixed attenuation (no switch adjustable). The main body of the probe is made of high-strength plastic, and the snap-type rotating grounding wire is made of soft plastic to ensure the service life of the cable under all bending stress.
- Made in Taiwan
- 100MHz operating frequency
- X10 fixed attenuation
- Stylus gold plated for replacement
- The "accessory package" is very suitable for engineers.
- Readout function (readout function), the oscilloscope automatically recognizes the
switching attenuation gear position, directly displays the correct voltage value,
without conversion, can reduce errors.
- Readout function (readout function), the oscilloscope automatically recognizes the
switching attenuation gear position, directly displays the correct voltage value,
without conversion, can reduce errors.
| Name | Oscilloscope Passive Probe |
| Model | HP6351R |
| Division Ratio | 10:1 |
| Band Width | DC to 350MHz |
| Rise Time | 1nS |
| Input Resistance | 10MΩ (Oscilloscope Input Resistance 1MΩ) |
| Input Capacitance | Approximately 11.5 pF |
| Compensation Range | 10 to 25 pF |
| Max.WorKing Voltage | 600V CAT I, 300V CAT II (DC+peak AC) |
| Operating Temperature | 0 ℃ to + 50 ℃ |
| Storage temperature | 85% RH or less (at 35 ℃) |
| Length | 1.2M |
| Safety APPL | Meets EN61010-031 CAT II |
No video
