HP9250 oscilloscope voltage probe（250MHz）_Passive probe_Oscilloscope probe & accessories_Products

Passive probe

HP9250 oscilloscope voltage probe（250MHz）

High frequency probe of 250MHz oscilloscope adopts replaceable low resistance gold-plated needle and clip-type rotary grounding wire, which allows users to switch manually between 1X, 10X and REF (reference ground). The main body of the probe is made of high strength plastics. Soft plastics are used at all bending forces to ensure the service life of the cable.

- Made in Taiwan

- 250MHZ operating frequency

- X1, X10 and REF attenuation switches

- Gold-plated needle can be replaced

- Including "attachment package" is very suitable for engineering use.

- Suitable for analog or digital oscilloscopes of 20MHz to 250MHz

Product PDF

DOWNLOAD

Product name	Oscilloscope passive probe
Model	HP9250
X10
Attenuation ratio	10:1
Bandwidth	DC to 250MHz
Rise time	1.4nS
Input impedance	10MΩ(oscilloscope input impedance 1MΩ)
Input capacitance	About 13pF
Compensation range	10 to 30 pF
Input voltage	600V CATⅠ,300V CATⅡ(DC + peak AC)
Gear position REF
	The probe head is disconnected and the oscilloscope is input to the ground.
X1
Attenuation ratio	1:1
Bandwidth	DC to 6MHz
Rise time	58nS
Input impedance	1MΩ(oscilloscope input impedance)
Input capacitance	56pF（Add oscilloscope capacitance）
Input voltage	300V CATⅠ,150V CATⅡ(DC + peak AC)
Operating temperature	0℃ to +50℃
Humidity	85% RH or less (at 35℃)
Overall length	1.2m
Safety regulations	Meets EN61010-031 CATⅡ