ETA5302/A AC Current Probe High Accuracy_Current probe_Oscilloscope probe & accessories_Products

Current probe

ETA5302/A AC Current Probe High Accuracy

The ETA5302/A oscilloscope current clamp uses imported components and has higher precision than the ETA5302/A. The measurement is safe without disconnecting the circuit. It is easy to connect with the object under test. The standard BNC output interface is very convenient to connect with the oscilloscope, data collector, digital voltmeter, etc. To observe the current waveform and meet the test requirements of special occasions.

Main applications:

Measure the harmonic components in the current

Detecting sinusoidal current waveform

Measuring phase shift in sine waves

Current of semiconductor switch

Distributed current monitoring

Power bus monitoring

Monitor harmonics, power, and power quality

Testing of large motors, pumps and fans

IGBT and MOSFET current measurement

Product PDF

DOWNLOAD

ETA5302：1000A gear (2000A Max.Peak)
Current range	1A...50A	50A...200A	200A...1000A	1000A...1200A
Signal output accuracy%	1%+1mV
Phase shift	Not specified	3°	2°	1°

ETA5302：100A gear (300A Max.Peak)
Current range	0.1A...5A	5A...20A	20A...100A	100A...120A
Signal output accuracy%	2%+5mV
Phase shift	Not specified	15°	10°	5°

ETA5302：100A gear (300A Max.Peak)
Current range	0.1A...0.5A	0.5A...2A	2A...10A	10A...12A
Signal output accuracy%	3%+10mV
Phase shift	Not specified	Not specified	15°	15°

ETA5302A：1mV/A (1000A Max.Peak)
Current range	5A...50A	50A...200A	200A...1000A
Signal output accuracy%	0.8%+1mV	0.8%+1mV	1%+1mV
Phase degree	2°	1°	1°

ETA5302A：10mV/A (100A Max.Peak)
Current range	0.5A...5A	5A...20A	20A...100A
Signal output accuracy%	1%+3mV	1%+3mV	1%+3mV
Phase degree	5°	4°	3°

ETA5302A：100mV/A (10A Max.Peak)
Current range	0.1A...1.0A	1.0A...5A	5A...10A
Signal output accuracy%	2%+5mV	2%+5mV	2%+5mV
Phase degree	15°	15°	10°

Phase degree	5A...1000A Peak 0.5A...100A Peak 100mA...10A Peak
Input/output ratio	1mV~/1A~ 10mV~/1A~ 100mV~/1A~
Measuring current range	100mA~1000A Peak
Maximum working voltage	600V CATⅢ
Frequency range	DC to 100KHz （-3dB for 50KHz to 100KHz）
Jaw size	Maximum 52mm
Overall dimensions	216 x 11 x 45mm
Cable length	1.5m
Operating temperature	0 ℃ to + 50 ℃
Humidity	95% RH or less (at 0~40 ℃)
Safety regulations	Meets EN61010-1/A2:1995 Meets EN61010-2-032:1995